Small Sign Support Systems

The Vendor is required to provide ultimate highway solutions slip-mate triangular slip bases, the nucor steel marion lap splice and slip safe breakaway systems, the franklin industries eze-erect and base-bolt breakaway systems, the heights safety-splice signpost system, the tapco vloc breakaway system, the atkore break-out sign post system and the design ovations snap'n safe breakaway sign post systems shall be functionally equivalent to materials tested and accepted by fhwa as meeting nchrp-350 or mash breakaway requirements.
- U-channel drive posts shall be securely strapped or wired in bundles for delivery as follows: 2lb/ft posts - 50 posts per bundle, nested and stacked; 3 lb/ft posts - 50 posts per bundle, nested and stacked.
- The anchor sleeve shall be of 7 gauge 1010 steel with an outside dimension of 3" square, and a wall thickness of 3/16" with a length as specified.
- The anchor sleeve shall have two 7/16" diameter holes on adjacent sides at approximately ¾" from the top of the sleeve to the center of the holes.
- Drive rivets shall be of 2117 aluminum or zinc alloy standard cadmium plated steel, with a 7/8" head, 3/8" shank and ¼" minimum grip range. Blind rivets shall be southco part # tl3806, or functional equivalent.