Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 14 SUBJEC T* Mobile Dental Scanners **USA Made Only** for Birmingham VA Health Care System GENERAL INFORMATION CONTRACTING OFFICE S ZIP CODE* 30096 SOLICITATION NUMBER* 36C24726Q0814 RESPONSE DATE/TIME/ZONE 08-25-2026 12PM EASTERN TIME, NEW YORK, USA ARCHIVE 15 DAYS AFTER THE RESPONSE DATE RECOVERY ACT FUNDS N SET-ASIDE PRODUCT SERVICE CODE* 6520 NAICS CODE* 339114 CONTRACTING OFFICE ADDRESS Department of Veterans Affairs VISN 7 Network Contracting Office 3 FL Directors Office 3700 Crestwood Parkway Duluth GA 30096 POINT OF CONTACT* CONTRACT SPECIALIST THADDEUS GRAY
[email protected] PLACE OF PERFORMANCE ADDRESS Birmingham VA Health Care System Dental Service Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 2 of 14 700 South 19th Street Birmingham, AL 35233 POSTAL CODE COUNTRY ADDITIONAL INFORMATION AGENCY S URL URL DESCRIPTION AGENCY CONTACT S EMAIL ADDRESS EMAIL DESCRIPTION DESCRIPTION Combined Synopsis/Solicitation Notice Page 10 of 14 Request for Quote (RFQ) #: 36C24726Q0814 Mobile Dental Scanners for Birmingham VA Health Care System. This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. The Government reserves the right to make no award from this solicitation. * The deadline for all questions is 12:00pm ET, August 19, 2026. All questions must be submitted in writing no later than the question cut-off date marked above. All questions will be answered officially through an amendment to the solicitation. ** Quotes are to be provided to
[email protected] no later than 12:00pm ET, August 25, 2026. Quotes shall not be hand carried. Faxed quotes shall not be accepted. Emailed quotes are the only method of submitted quotes (4MB email limit). The Government reserves the right to make the award solely on initial Quotes received. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation. This RFQ shall be completed in its entirety, and signed and dated, failure shall not be considered for award. This is a Request for Quote (RFQ), and the solicitation number is 36C24726Q0814. The government anticipates awarding a firm-fixed price contract resulting from this solicitation. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 effective March 13, 2026. The North American Industrial Classification System (NAICS) code for this procurement is 339114 Dental Equipment and Supplies Manufacturing with a business size standard of 750 employees. This solicitation is 100% set-aside for small business (SB). List of Line Items; Line Items Description Quantity Unit of Measure Unit Price ($) Total Price ($) 0001 CEREC Primescan AC TP with Steel Sleeve (DI) or equal **USA Made Only** 1 EA 0002 CEREC SW 5.3 Primary or equal **USA Made Only** 1 EA 0003 DS Core Care Scanner AC New 6 Yr. Annual or equal 6 EA 0004 DS Power Up Labor Scanner AC or equal **USA Made Only** 6 EA 0005 Primescan Connect or equal **USA Made Only** 1 EA 0006 DS Core Care PS Connect New 6Yr. Annual or equal 6 EA Grand Total ($) Description of Requirements for the items/Services to be acquired: The requirement is for Mobile Dental Scanners for Birmingham VA Health Care System, please reference attached Statement of Need (SON). Delivery and acceptance are to be F.O.B Destination 90 Days ARO at the Birmingham VA Health Care System, located at: Birmingham VA Health Care System Dental Service 700 South 19th Street Birmingham, AL 35233 52.212-1 Instructions to Offerors Commercial Products and Commercial Services Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include The solicitation number; The name, address, telephone number of the Offeror; The Offeror s Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator; Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation; Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments. Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. Late submissions, modifications, revisions, and withdrawals of offers. Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation. Any offer, modification, or revision received after the time specified for receipt of offers is late and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted. If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. Offerors may withdraw their offers by written notice to the Government received at any time before award. Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror s initial offer should contain the Offeror s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received. Debriefings. If a postaward debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable: The agency s evaluation of the significant weak or deficient factors in the debriefed Offeror s offer. The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror. The overall ranking of all Offerors when any ranking was developed by the agency during source selection. A summary of the rationale for award. For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror. Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities. (End of provision) ADDENDUM to RFO 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL Submission of quote shall include the following volumes: (I) Technical capability or quality offered to meet the Government requirement with a Brand Name or Equal; (II) Price. Volume I - Technical capability or quality to meet the Government requirement. The offeror shall submit its quote demonstrating how it meets the requirements of the Statement of Need (SON) and solicitation. Offeror shall provide manufacturer information as well as Part Numbers for any or equal item, as needed. Volume II Price Price - The offeror shall complete the pricing schedule provided in Section (v) above: Price/Cost Schedule. The offeror shall price the base and all option year line items. (End of Addendum to 52.212-1) 52.212-2, Evaluation--Commercial Items applies to this acquisition. ADDENDUM to RFO 52.212-2 EVALUATION COMMERCIAL ITEMS: The Government will award a contract resulting from this solicitation to the offeror responsible whose offer conforming to the solicitation will be most advantageous to the Government considering price and other factors. The following factors shall be used to evaluate quotations: Factor I. Technical capability or quality offered to meet the Government requirement Factor II. Price Evaluation Approach. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government will use comparative analysis. The following factors will be used to evaluate offers: Factor I. Technical capability or quality offered to meet the Government requirement: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Factor II. Price: The Government will evaluate the price by adding the total of all line-item prices, including all options (if applicable). The Government may use various price analysis techniques and procedures to make a price reasonableness determination. Offers that do not meet or exceed the technical capability to the Government requirement, as stated in Factor 1, shall not be selected regardless of price. If offeror does not provide all volumes as outlined in RFO 52.212-1 Instructions, the offer may be considered nonresponsive. (End of Addendum to 52.212-2) 52.212-4 TERMS AND CONDITIONS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference. Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights Within a reasonable time after the defect was discovered or should have been discovered; and Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall Notify the Contracting Officer in writing as soon as possible; Remedy the delay as quickly as possible; and Notify the Contracting Officer when the occurrence is over. Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b). Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. Payment Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315. Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made. Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); Affected contract number and delivery order number, if applicable; Affected line item or subline item, if applicable; Contractor point of contact; and Provide a copy of the remittance and supporting documentation to the Contracting Officer. Interest.(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. Final decisions. The Contracting Officer will issue a final decision as required by FAR part 33 if The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32). If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. Amounts shall be due at the earliest of the following dates: The date fixed under this contract. The date of the first written demand for payment, including any demand for payment resulting from a termination for cause. The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on- The date on which the designated office receives payment from the Contractor; The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract. Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. Termination for the Government s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract. Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.C. chapter 21 relating to procurement integrity. Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: The schedule of supplies/services; The Disputes, Payments, Invoice, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; Other contract clauses incorporated in the solicitation or contract; Addenda to this solicitation or contract; Solicitation provisions incorporated in the solicitation; Other paragraphs of this clause; Other documents, exhibits, and attachments; and The specification. Unauthorized obligations. Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: Any such clause is unenforceable against the Government. Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an I agree click box or other comparable mechanism (e.g., click-wrap or browse-wrap agreements), execution does not bind the Government or any Government authorized end user to such clause. Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. Comptroller General examination of record. This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract. The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor s directly pertinent records involving transactions related to this contract. The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of clause) 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (APR 2026) Definitions. As used in this clause Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor. Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources. In connection with the performance of work under this contract, the Contractor agrees as follows: The Contractor will not engage in any racially discriminatory DEI activities; The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause; In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts; The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause. The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4). The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States. 52.225-2 Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . The Offeror shall separately list the line-item numbers of domestic end products that contain a critical component (see FAR 25.105). The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." Foreign End Products: Line Item No. Country of Origin Exceeds 55% domestic content (yes/no) (b)[List as necessary] Domestic end products containing a critical component: Line Item No. [List as necessary] The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation. (End of provision) Instruction to Offerors All quoters shall submit your Quotes no later than August 25, 2026, at 12:00PM (EST), via email to
[email protected] . Please place in ATTENTION: 36C24726Q0814 Mobile Dental Scanners in the subject line of your email. All offers must include the solicitation number. Late submissions shall be treated in accordance with the solicitation provision at RFO 52.212-1(c). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail no later than August 19, 2026, at 12:00PM (EST), via the same email address. Please place in ATTENTION: 36C24726Q0814 Mobile Dental Scanners in the subject line of your email. Questions received later than this time/date may not receive a response.
