Brine Solution Production System

The Vendor is required to provide brine solution production systems to the department.
- Brine Solution Production Systems will grant more flexibility to the State in responding to these snow events.
- Shall have two (2) fork pockets mounted under bottom of hopper. These should be 4"x 8" to accommodate 3" thick forks.
- Coupler area shall be built to add support and guard hopper from damage.
- Hoses that will be disconnected for removal of hopper shall be equipped with quick couplers.
- At a minimum, circulation system shall allow the following functions: making brine, re-circulating entire system, re-circulating holding tank, re- circulating hopper, pumping hopper to holding tank, pumping out hopper, hopper clean out, pumping out holding tank, and re- circulating lines.
- Centrifugal pump shall be 2” x 1½” (minimum), stainless steel, and with ceramic seals of appropriate rating that when combined with motor assembly, shall be capable of pumping 160 gpm at 70 psi.
- Shall have an emergency shut off.
- Shall include a remote control with a minimum of 10ga/3, 50-amp, 10 ft. cord. Switch meets or exceeds UL 4, 4X and 13 standard requirements.