Emergency Medical Ambulance Simulator Services

The Vendor is required to provide for an EMS ambulance simulator suitable for installation in a standard classroom setting.
- Specifications required: 
•    Approximate dimensions suitable for installation in a standard classroom environment (approximately X–Y ft wide, X–Y ft long, and X–Y ft high). Vendor to disclose final footprint
•    Simulator accurately replicates the interior layout, equipment placement, and workflow of modern Type I/II/III ambulances used in current EMS practice.
•    Designed to operate using one standard 110v electrical outlet. 
•    ¾” plywood grade subfloor with commercial grade vinyl flooring
•    Low voltage electrical with automotive grade wiring and connections. 
•    Interior lights
•    Interior storage cabinets
•    CPR seat with inside storage
•    Action control station
•    Exterior emergency lights 
•    1080p Cameras/NVR system (with audio, recording and remote monitoring capabilities)
•    Bumper with diamond plated kick plates and vacuum pump
•    Diamond plated under compartment storage
•    Diamond plate ALS exterior equipment access door.
•    Diamond plate stair chair/Backboard storage access door.
•    Attendant airway seat
•    Additional oxygen outlet in ceiling
•    Compressed air system designed solely to simulate oxygen flow for instructional use; not intended for medical or patient use
•    Hospital style oxygen flowmeter capable of 15 LPM or equivalent
•    Vacuum Pump for simulated suction
•    Split blade EMS scoop stretcher or equivalent
•    Modular EMS storage bins or equivalent
•    Overhead IV hanger.